Products > Initiation




Intelligent

TSPY TSPY
Detection devices


The T-Spy smoke, Heat and Multi detectors employ advanced addressable digital communication of analog readings
IS800 IS800
Detection Devices


The IS800 Analog Addressable Thermal Sensors are designed to provide the highest effectiveness by utilizing the latest technology

IS801 IS801
Detection Devices


The IS801 ionization Smoke Detector has a molded white polycarbonate case with wind resistant smoke inlets

IS802 IS802
Detection Devices


The IS802 Photoelectric detector is white polycarbonate and will not fade. Terminals are nickel plated stainless steel

IS803 IS803
Detection Devices


The IS803 Multi-Sensor detector contains a photo smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value.

IS810 IS810
Isolator Module


 The Isolator uses a patented technique for recognizing a wiring short circuit.  The isolators disconnect the shorted portion of the loop from the rest. (IS805 base required)

IS812 IS812
Monitor Module


The IS812 Quick Response Monitor Module is designed to fit into a 4" Junction box.

IS813 IS813
Input Output Module


The IS813 Monitor Input-Output Module is designed to fit into a 4" junction box

IS814 IS814
Sounder Module


IS814 Monitors and controls one circuit of notification appliances or switches audio to a voice evacuation speaker circuit

IS815 IS815
Mini Monitor Module


IS815 may be used to monitor any fire alarm initiating device with normally open contacts

I SPY I SPY
Detector bases


All detectors in the I-Spy range fit int the I-Spy bases

SL-DAA SL-DAA
Duct Detector 2 wire


The SL-DAA Series Smoke Duct Detector is the latest analog addressable innovation for early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial, and Residential applications.

SL-DA4R Series SL-DA4R Series
4 Wire Duct Detector


The SL-DA4R Series Smoke Duct Detector is the latest analog addressable innovation for early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial, and Residential applications.

Remote Accessories Remote Accessories
SL Series Remotes


Remote accessories are designed to be used with Harrington Signal Inc., Addressable Tracker SL-DAA and SL-DA4 series Duct Smoke Detectors to provide audible and visual indication as well as remote test alarm relay functions. 

200 Series Low profile 200 Series Low profile
Photo smoke and heat detectors


Harrington Signal 200 Series Intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors.

7251 Laser-Based Smoke Detector 7251 Laser-Based Smoke Detector
Intelligent Laser Smoke


Model 7251 is an intelligent laser-based photoelectric smoke detector

Mounting bases Mounting bases
200 series bases


200 Series Bases provide a variety of mounting options to meet your installation challenges. Harrington Signal offrs relay, isolator, and sounder base options for 200 Series detectors.

B200SR Series B200SR Series
Sounder bases


The B200SR sounder base is designed for new and existing dwelling unit applications.

The B200SR-LF Low frequency sounder base is designed to meet the NFPA 72 sleeping space requirements

M500 modules M500 modules
M500 series modules


The M500 series intelligent modules are designed to meet a wide range of applications.  Monitor and control modules can be used to supervise and activate sounds, strobes, door closers, pull stations, waterflow switches, conventional smoke detectors, and more.

500 Series Intelligent Modules 500 Series Intelligent Modules
Multiple input output


The M500 series intelligent modules are designed to meet a wide range of applications.  Monitor and control modules can be used to supervise and activate sounds, strobes, door closers, pull stations, waterflow switches, conventional smoke detectors, and more.

DNR & DNRW DNR & DNRW
Intelligent duct dectectors


The InnovairFlex DNR Intelligent non-relay photoelectric duct smoke detector feature a pivoting housing.

BEAM 200 and  200S BEAM 200 and 200S
Addressable Beam Detectors


The Beam 200 and beam 200S intelligent reflected beam smoke detectors are designed to be used with UL Listed compatible control panels only

XP 95 Series XP 95 Series
Apollo Detectors


The XP95 series of fire intelligent detectors are advanced in design, improved in performance, and have unique features that benefit the installer and end users.

HSPS Pull stations HSPS Pull stations
Addressable Pull Station


Addressable Manual Pull Stations provide the most reliable manually activated input signal for early warning.

VLC 400 VLC 400
Early warning smoke detection


VLC detectors provide Very Early Warning of potential fire conditions

Conventional

FFE50R/FFE100R FFE50R/FFE100R
FFE-50RU FIRERAY Reflective Beam Detector


 FFE50RU / FFE-100RU FIRERAY Reflective Beam Detector (160-300ft)

F5000 F5000
Self Align Beam Detector


 

Self Align Beam Detector

C-Spy C-Spy
Conventional Detectors and bases


Photoelectric, Ionization, Heat, C-Spy Bases, Relay Bases

100 Series 100 Series
Conventional Photo Electric


 The 100 seriesis designed to meet the performance criteria designated by UL

2W/4W Series 2W/4W Series
Conventional Smoke detectors


Conventional Smoke Detectors also conventional smoke and thermal

SLR-24V SLR-24V
Conventional Photo smoke


The SLR-24V can be used in all areas where Photoelectric Smoke Detectors are required.

DFE 135/190 DFE 135/190
Conventional Heat


The DFE 135/190 fixed temperature heat detector is suited for installation where high heat output fires are expected or in areas where ambient conditions would not allow use of other detection methods.

DCD 135/190 DCD 135/190
Conventional heat detector


The DCD 135/190 fixed temperature/rate-of-rise heat detectors are suited for installation where high heat output fires are expected or in areas where ambient conditions would not allow use of other detection methods

NS & HSC Series NS & HSC Series
Conventional Detector Bases


The NS6 and NS4 Series is designed specifically for use with Conventional Models listed on the product cut sheet.

5600 Series 5600 Series
Conventional Heat detectors


The 5600 Series offers a full-line of congiurations to accommodate a broad range of applications.  Both single and dual circuit models are available for low and high temperature ratings with either fixed temperature or combination fixed temperature/rate-of-rise (ROR) activation

302 Series 302 Series
Conventional Heat detectors


Each model is a normally open device designed especially for the detection and alarm systems

CO1224T CO1224T
Carbon Monoxid Detector


With RealTest™ technology, the CO gas sensing cell of the CO1224T CO detector can be tested using a carbon monoxide gas agent

HSPS Series HSPS Series
Conventional Pull Station


HSPS Series Non-Coded Manual Pull Stations provide the most reliable manually activated input signal for early warning signaling on supervised or non-supervised alarm systems

D2 D2
2 Wire Conventional Photo Duct


The D2 2-wire photo-electric duct smoke detector features a pivoting housing that fits various applications both square and rectangular footprints mount to round or rectangular duct work

4120 4120
4 Wire Photo Duct Detector


The D4120 4-wire photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints and mounts to round or rectangular duct work.

4120W 4120W
Watertight 4 wire Duct Detector


The 4120W watertight 4-wire photoelectric duct smoke detector is UL listed as a watertight enclosure providing protection against falling dirt, rain, windblown dust, splashing and hose directed water.

SL-2000 Series SL-2000 Series
Photo & Ion Duct Detectors


The SL-2000 Series Smoke Duct Detector is the latest innovation for early detection of smoke and products of combustion present in air moving through HVAC ducts in Residential applications.

Explosion Proof

U5015 U5015
Explosion Proof Smoke Detector


The U5015 Explosion Proof Smoke Detector has Division and Zone explosion-proof ratings and is suitable for industrial and commercial applications.
HSPS Series HSPS Series
Explosion proof pull station


Harrington HSPS series explosion proof and weatherproof non-coded manual pull stations provide reliable manually actived input signal for early warning signaling on supervised or non-supervised alarm systems

Detect A Fire Detect A Fire
High Temp Heat Detectors


 

Vertical detectors are designed for use in both "ordinary" or"hazardous" locations.

 

Español

TSpy Smokes TSpy Smokes
Addressable Smokes


 

El T-Spy serie de detectores de humo y calor emplean comunicaciones digitales direccionables avanzados de las lecturas analógicas.

 

IS800 IS800
Detector de calor


Los detectores termicos IS800 son diseñados para brindar la eficacia más alta utilizando la tecnología más avanzada.”

IS801 IS801
El Detector de Humo de ionización IS801


El Detector de Humo de ionización IS801 tiene una cascara blanca de policarbonato moldeado  con entradas de humo resistente al viento.”

IS802 IS802



El detector Fotoeléctrico IS802 es el policarbonato blanco y no se descolorará. Los terminales son el acero stainlee plateado del níquel

IS803 IS803



“El detector multi sensor contiene un sensor foto eléctrico y un sensor de temperatura tipo termistor cuyos salidas se combinan para dar un valor analógico final”

 

 

IS810 IS810
Isolator Modules


 

La mayoría de los sistemas l-Spy están conectados como circuitos cerrados que pueden interrogarse de cualquier extreme para que todos los aparatos puedan

 

to HSPS Estacion manual to HSPS Estacion manual



“Los estaciones manuales HSPS no codificado brindan la señal de entrada activada manualmente más fiable para la señalización de alerta temprana en los sistemas de alarma supervisados ??o no supervisados.”

 

 

 

CSpy Detectors CSpy Detectors
Conventional detectors


 

Las bases de relevo C-spy relay están diseñadas parausarse con los detectores de fuego Harrington      C-spy fire y el equipo de control compatible. No debenusarse con ningún otro tipo de detector.